The X400 Helmet fits into your hair routine as a true beauty ritual to care for your hair in depth, every day. While conventional hair care works on the outer scale of the fiber, the X400 acts at the heart of the scalp, right from the root. It enhances the beauty of the hair, transforms the fiber for thicker, more resilient hair, strengthens hair weakened by daily stressors (heat, coloring, sea, sun) and helps support the growth of existing hair.*

The X600 Expert Helmet is designed to target visible, established density loss. With 600 LASERS and LEDs for an ultra-dense, even coverage across the entire scalp, it helps slow down hair loss, strengthens existing hair right from the root for a stronger, thicker fiber, and redensifies the hair for a visibly denser, fuller look.*

Results are progressive and build up with regular sessions. Results may vary from person to person.

*Independent clinical studies conducted by GREDECO, a French laboratory, under dermatological supervision — protocols No. D164.12.25 (X400) and No. D166.12.25 (Expert X600). Results may vary from person to person.

Results build up gradually. Hair follows a biological cycle measured in months, not weeks: this is the timeframe to keep in mind.

Consistency in sessions is key. The first results are generally observed between 2 and 4 months, and may vary from person to person.

Yes. Our LASER & LED technology works deep within the scalp to help slow down hair loss and help preserve hair density. The results of our helmets are clinically proven.*

The X400 Helmet and the Expert X600 Helmet both act on hair loss. The Expert X600, with its mesh of 600 LASERS and LEDs, offers a denser and more even action across the entire scalp.

However, the helmet does not stop hair loss permanently: it is a cosmetic device that accompanies the hair. In case of significant or sudden hair loss, consult a dermatologist.

*Independent clinical studies conducted by GREDECO, a French laboratory, under dermatological supervision — protocols No. D164.12.25 (X400) and No. D166.12.25 (Expert X600). Results may vary from person to person.

Nos précédents casques proposaient deux modes d’utilisation : un mode continu et un mode pulsé. Ce dernier, que nous privilégions pour ses performances, pouvait néanmoins générer un léger bruit lors de son utilisation et ainsi gêner certains utilisateurs.

Avec cette nouvelle génération, nous avons optimisé notre technologie afin de conserver tous les bénéfices du mode pulsé, tout en supprimant cette nuisance sonore.Nous avons donc fait le choix de ne conserver que ce mode, afin de proposer un protocole à la fois performant, simplifié et plus confortable au quotidien.

Cette évolution nous permet ainsi d’aller à l’essentiel : un seul mode, optimisé pour offrir la meilleure efficacité possible.

No. The helmet acts on existing hair: it promotes its growth and helps strengthen it from the root.

This is precisely why it is more relevant to act early, from the very first signs of density loss.

No. The device supports hair health only while the routine is followed: it is ongoing care, not a permanent result. Stopping the sessions ends this support.

The device is a beauty tool that supports your hair as part of a routine. Once your concern is addressed, you can stop using it or continue if you wish.

The X400 and Expert X600 Helmets are a new generation, built on what we have learned. Three years of development, independent clinical studies conducted by GREDECO, a French laboratory, on our previous models, and ISO 13485 certification that demands rigorous design standards: every parameter has been validated, refined, and pushed further.

This work has led to precise choices, documented and proven on our own devices:

• 655 nm wavelength: the wavelength validated by our clinical studies on our helmets.
• Irradiance of 7 to 10 mW/cm²: the light power calibrated for use on the scalp.
• Fluence of 6 to 9 J/cm² per session: the dose delivered over 15 minutes.
• 15-minute session, every other day: the protocol chosen for both devices.

Because they diffuse light differently. LASERS emit a narrow, direct beam for targeted action. LEDs, wider in scope, ensure even coverage of the entire scalp. Combining them means benefiting from both at once: the precision of LASER and the complete coverage of LED.

Yes. Our previous models were the subject of independent clinical studies, conducted in France by GREDECO, under dermatological supervision. These results directly informed the design choices of the X400 and Expert X600 Helmets.

Clinical efficacy studies are currently underway on these new models, conducted by GREDECO, an independent French laboratory, under dermatological supervision. We chose to run them over 6 months, because that's the true hair cycle: it's at this point that real results are observed, not at 2 months. We are currently halfway through, and the first interim results are in.*

*Independent clinical studies conducted by GREDECO, a French laboratory, under dermatological supervision — protocols no. D164.12.25 (X400) and no. D166.12.25 (Expert X600). Results may vary from person to person.

Many hair devices display several wavelengths. What's rarely mentioned: each additional wavelength reduces the energy available for the others. The more wavelengths a device multiplies, the more the sources are divided, and the more the irradiance of each wavelength decreases.

We made the opposite choice. All our sources, both LASERS and LEDs, emit at a single wavelength, 655 nm, so that each one receives the maximum available energy. Moreover, the wavelength we chose is the one validated by NOOANCE clinical studies, whose effects have been clinically demonstrated.

NOOĀNCE manufactures its products and develops them within the EN ISO 13485 framework, the design and quality standard used for medical-type products. Our products are not medical devices, but applying this standard requires us to uphold demanding design rigor.

During production, each device is individually tested. Among the criteria checked: battery life and performance, irradiance measurement, and spectral precision of each source. Results are recorded in a batch file and each product is individually traceable.

Our ISO 13485 certification is audited each year by Bureau Veritas. In addition, we commission SGS, an independent laboratory present in 115 countries, to objectively verify the compliance and performance of our products.

It is this level of rigor that allows us to communicate precisely about our parameters: irradiance, spectral precision, fluence per session.

All our helmets share the same technological expertise: a dual LASER and LED technology at 655 nm, developed and validated by our clinical studies. What sets them apart is the density of the light mesh and the proportion of LASERS.

• The X400 Helmet: 100 LASERS and 300 LEDs, for 400 sources in total. It's the daily hair beauty ritual: it helps slow hair loss, stimulates the growth of existing hair, enhances hair beauty, transforms the fiber for thicker, shinier hair, and strengthens hair weakened by daily stress. With a reinforced density of LASERS on the most exposed areas: temples, hairline and vertex.*
• The Expert X600 Helmet: 300 LASERS and 300 LEDs, for 600 sources in total, for an ultra-dense, even mesh across the entire scalp. Designed to act on visible, established density loss: it helps slow down hair loss, redensifies hair and strengthens existing hair from the root for a stronger, thicker fiber.*

*GREDECO clinical efficacy studies, protocols no. D164.12.25 (X400) and no. D166.12.25 (Expert X600). Results may vary from person to person.

Here's what sets the two generations apart:

What stays the samethe core technology remains the same: a combination of LASER diodes and red LEDs at 655 nm, direct contact with the scalp, based on the principle of hair photobiomodulation.

What has evolved:

Compared to our previous models, session duration has been reduced from 25 to 15 minutes. This is due to increased delivered energy, irradiance and fluence in joules, which allows the target dose to be reached in less time. Less time per session does not mean less effectiveness: it is precisely because the dose is maintained that the protocol works. What remains unchanged: consistency is still key. One session every other day, without prolonged interruptions.

No, the helmet operates with a single mode, designed for simple use with no adjustments needed.

Both devices rely on the same parameters: 655 nm, 15-minute sessions every other day. The difference lies in the number of LASERS — 100 on the X400, 300 on the Expert X600 — and therefore in the density of the light mesh.

The choice depends on your situation: the X400 to enhance the beauty of the hair, transform the fiber and maintain its quality daily; the Expert X600 when density loss is already visible and established.

The principle remains the same: dual LASER and LED technology validated by our clinical studies. What evolves is the number of sources, the density of the mesh and the comfort of use. Three years of development, clinical studies and field feedback have allowed us to go further and offer a new generation of helmets.

No. It's still NOOĀNCE technology. The new generation is simply more powerful, with a denser mesh, shorter sessions and improved comfort. This does not make your current helmet any less relevant: it was designed according to rigorous specifications and it meets them. We simply keep advancing our devices with each generation.

Yes. Both devices target different areas and don't compete with one another: the mask focuses on the face, the helmet on the scalp. They can be used on the same day, in whichever order suits you.

We recommend a 15-minute session every other day. This is the protocol used for both helmets and the one applied in the GREDECO clinical studies.*

Increasing the frequency provides no additional benefit. However, avoid prolonged interruptions: consistency is key to achieving results.

*GREDECO clinical efficacy studies, protocols No. D164.12.25 (X400) and No. D166.12.25 (Expert X600). Results may vary from person to person.

Yes, in both cases.

The X400 is designed for everyone, regardless of hair type or age. It's the beauty ritual that completes your haircare routine: while your products nourish and beautify the fiber on the surface, the X400 works at the heart of the scalp, right from the root.

The Expert X600 is designed for those facing an already visible and established loss of density, for a denser, more targeted action across the entire scalp.

The session duration is calculated based on the helmet's irradiance to deliver a fluence of 6 to 9 J/cm² per session. Regular sessions make it possible to deliver this dose each time, without having to extend the exposure time.

Two cushion sizes are included, small and large. Choose the one that best fits the size of your head and attach it using the magnetic system. The helmet should sit snugly on your head, without any pressure.

No. Simply resume your usual routine, one session every other day. There's no need to make up for missed sessions.

Yes. The session takes place on dry hair with no product on the scalp. Apply your treatments, including the Scalp Serum, after the session.

Do not use photosensitizing active ingredients in high concentration in the hours before the session. If in doubt, consult your dermatologist.

Before cleaning, turn off the device. Wipe the inner surface and cushions with a soft cloth lightly dampened with water. Never immerse the helmet and do not use solvents or abrasive products. Allow to air dry.

Yes, this can happen, and it is temporary. This is known as a purging phenomenon.

Stimulating the hair cycle accelerates the shedding of hair that is already at the end of its cycle, in the telogen phase, dead but still attached, to make way for new hair in the growth phase. These are therefore not "living" hairs falling out.

This phenomenon is generally observed over the first two months, then fades. It does not affect everyone.

Yes. Before first use, we recommend reading the instructions provided with the helmet. It details all the warnings, contraindications, and precautions to follow, particularly in cases of pregnancy, medical treatment, scalp conditions, or for individuals under 18 years of age.

If you are unsure about your personal situation, please consult your doctor or dermatologist before use.

Yes. The use of the helmet is contraindicated in the following cases: known photosensitivity or skin reaction to light; pregnancy and breastfeeding; active cancer or cancerous lesion; suspicious or precancerous lesions; ongoing photosensitizing medication; history of epilepsy or light-triggered seizures; open wounds, infection or irritation of the scalp; recent surgery or laser treatment on the area; fever, acute inflammation or severe circulatory disorder.

Two clarifications:

• Photosensitivity: our helmets emit no UV radiation, but the entire light spectrum may cause a reaction in photosensitive individuals. Before the first session, we recommend carrying out the sensitivity test described in the instructions.

• Pregnancy and breastfeeding: use is not recommended as a precautionary measure. No studies have been conducted on pregnant or breastfeeding women, which prevents us from providing guidance.

If in doubt, consult your doctor or dermatologist before use.

No. The light is directed inward, toward the scalp, and the device's design prevents any direct exposure to the eyes. Two sensors also ensure that the helmet only switches on when properly positioned on the head. Do not look directly at the light sources while the device is on.

Some people may experience a mild tingling sensation during or after the session. If the discomfort persists or intensifies, stop using the device and contact our customer service.

A slight feeling of warmth may occur during the session: this is normal. It comes from the LASERS, which concentrate more energy than the LEDs on a smaller area. This sensation remains mild and fades by the end of the session. If it becomes uncomfortable, stop the session and contact our customer service.